QMS10M
Ph: 02 9319 5222
10 kW
Genset Ratings
Voltage: 230V
Frequency: 50Hz
Amperes: 43.5A Max - 38.3A Cont.
Power: 10kW Max - 8.8kW Cont.
Weights and Dimensions
Dry Weight:
267kg (with shield) - 244kg (without shield)
Length:
1011mm (with shield) - 925mm (wihtout shield)
Width:
633mm (with shield) - 489mm (without shield)
Height:
686mm (with shield) - 620mm (without shield)
Engine Specifications
Engine Base: Nanni Diesel - N4.38
Cycle: 4 strokes diesel
Cylinders: 4 in line
Displacement: 1498mm
Bore and Stroke: 78 x 78.4mm
Combustion System: Indirect (E-TVCS)
Rated RPM: 1500
Max power at rated RPM: 18HP
Intake: Natural
Fuel System
Fuel Injection Pressure: 140 bar
Fuel Injection Pump: In Line
Fuel Pump Priming: Mechanical
Governor Type: All Speed Mechanical
Cooling System
Seawater Pump Type: Neoprene Rotor
Freshwater Pump Type: Coaxial Alternator Driven
Fresh Water Capacity: 5L
Exhaust Manifold: Fresh Water Cooled
Exhaust Elbow: Water Injected
Max Allowable back pressure: 0.127 bar
Max Exhaust Gas Temperature: 550 Degrees Celcius
Engine Electrical System
Engine Alternator: 12V - 40A
Battery Recommended: 75Ah
Starter Motor: 12V - 1kW
Fuel Consumption
Fuel Consumption at Full Load: 3.3L/hr
Air Requirements
Combustion Air at 25 Degrees Celcius: 60
Fresh Air Intake Expanse: 180
Hot Air Outlet Expanse: 120
Installation Data
Exhaust Connection: 50mm
Fuel Connection: 8mm
Fuel Pump - Max Suction Height: 0.5m (std pump) - 1.8m (with add. electric pump)
Sea Water Connection: 25mm
Engine Operating Angle: 15 degrees (cont) - 30 degrees (max)
Main features of genset in enclosure
- - Low noise level (thanks to an aluminium sound proof canopy with polyester marine paint and a sound proof material with PVC plate)
- - Water cooling system
- - Hydraulic and electric connections located on the same side :
- - Electronic remote control and protection system
- - Easy on board installation
- - Reduced dimensions
- - Large accessories range
- - Large access trough every 5 sides to allow genset checking and maintenance :
- - Possibility to dismantle the canopy in every part to extract the genset and to put it in open version in the case of extraordinary maintenance
Kubota Base
The QMS10M Genset is equipped with a sturdy and effi cient Kubota base engine, tested in all marine or industrial applications throughout the world. The E-TVCS combustion system also allows to comply with the most stringent emissions regulations while reducing noise level and maintaining low fuel consumption.
Reliability and longevity
Its 1498 cc and its Nanni Compact Cooling® heat exchange cooling system, bring to this generator set a maximal life span and a smooth functioning.Maintenance operations are simple and quick, thanks to, among other things, a timing gear and an easy access to the various service points.
Onboard power supply and comfort
The light and compact alternator delivers a single phase tension of 230 Volts. It is also equipped with an electronic regulator which, together with the constant engine speed, provides an excellent stability to frequency and tension.
Soundproof Sydtem
Delivering a maximum power of 10 kW, the Nanni Diesel genset QMS10M ensures the powering of the on-board electrical appliances, including those with high surge rating. The light and compact alternator delivers a single phase tension of 230 Volts. It is also equipped with an electronic regulator which, together with the constant engine speed, provides an excellent stability to frequency and tension.
Previous page: QMS7.5M
Next page: Marine Gearboxes